Metal stamping uses punches and molds to deform or break stainless steel, iron, and other plates and heterogeneous materials to achieve a process with a certain shape and size.
The stamping process can be roughly divided into two categories: the separation process and forming process (also divided into bending, deep drawing, and forming). The separation process is to separate the stamping parts and blanks along a certain contour line during the stamping process, and the quality of the separation section of the stamping parts must also meet certain requirements; the forming process is to make the stamping blanks undergo plastic deformation without damage. And transform it into the required finished shape, and at the same time, it should meet the requirements of dimensional tolerance and other aspects.
According to the temperature during stamping, there are two ways of cold stamping and hot stamping. This depends on the strength, plasticity, thickness, degree of deformation, and equipment capabilities of the material while considering the original heat treatment state and end-use conditions of the material.
If you need the
Metal Stamping Fabrication Service to do
Precision Metal Stamping,
Progressive Die Stamping,
Custom Metal Stamping like
Automotive Sheet Metal Stamping, etc., please get in touch with us.
Pro Success Development Limited