What Are The Precautions Of Doing Stainless Steel Cold Stamping?

As we knew, that stainless steel is a metal material that is difficult to process. It has high strength and poor plasticity, which will bring many challenges to the stamping process for producing Stainless Steel Cold Stamping Parts. Therefore, when performing stainless steel cold stamping, the following precautions need to be observed:

Choose the right tool and mold: Stainless steel cold stamping requires the use of tools and molds that are hard enough and wear-resistant to ensure that there will be no defects such as tearing, twisting, and waves for the Stainless Steel Metal Stamping Parts.

Select the appropriate lubricant: lubricant can reduce friction, reduce frictional heat, and is beneficial to the deformation of metal materials in the process of cold stamping. However, it should be noted that chlorine or acid-containing lubricants cannot be used when selecting lubricants, because these lubricants will leave corrosive substances on the stainless steel surface and cause surface defects.

Control stamping speed and pressure: When performing stainless steel cold stamping, attention should be paid to controlling stamping speed and pressure. Excessive speed and excessive pressure will cause excessive deformation of metal materials, resulting in cracks, distortions and other defects.

Keep it in a good state of cleanliness: It is very important to keep the machine and mold in a clean state. Stainless steel is sensitive to external impurities and foreign matter, and any impurities may cause surface defects in the cold stamping process.

Proper temperature control: During cold stamping of stainless steel, it is necessary to control the temperature of the coolant and the metal material to ensure that the material can be cold stamped completely and accurately.

The above are the precautions for stainless steel cold stamping, we hope it can help you better understand the topic.
If you need Custom Metal Stamping Services, please tell us your specification requirement and send the drawings to us, which will make us help you better.