Main Features Of Metal Stamping Parts

Metal Stamping Parts are mainly formed by stamping metal or non-metal sheets with the help of the pressure of the press and stamping die. It mainly has the following characteristics:

1. The metal stamping parts are made by stamping under the premise of low material consumption. The parts are light in weight and good in rigidity, and after the sheet is plastically deformed, the internal structure of the metal is improved, so that the strength of the metal stamping parts is improved. made progress.

2. The metal stamping parts have high dimensional accuracy, the same size as the mold parts, and have good interchangeability. Common assembly and application requirements can be met without further machining.

3. During the stamping process of metal stamping parts, because the surface of the material is not damaged, it has better surface quality, smooth and beautiful appearance, which provides convenient conditions for surface painting, electroplating, phosphating and other surface treatments.

Metal stamping parts refer to the molds for steel/non-ferrous metals and other plates at room temperature, which are formed into the specified shape by the pressure required for processing by the press. Compared with other methods of mechanical processing and plastic processing, stamping parts processing has many common advantages in both technical and economic aspects. The main performance is as follows.
(1) The production efficiency of metal stamping processing is high, the operation is convenient, and it is easy to complete mechanization and automation. This is because metal stamping relies on dies and stamping equipment to complete the processing. The number of strokes of ordinary presses can reach dozens of times per minute, and the high-speed pressure can reach hundreds or even thousands of times per minute. It is possible to get a punch.
(2) During metal stamping, since the die ensures the size and shape accuracy of the metal stamping parts, and generally does not damage the appearance quality of the stamping parts, and the life of the die is generally longer, the quality of the metal stamping is stable, the interchangeability is good, and the "Identical" features.
(3) Metal stamping can process parts with a wide range of sizes and complex shapes, such as stopwatches as small as clocks, as large as automobile longitudinal beams, cover parts, etc., plus the cold deformation hardening effect of materials during metal stamping, metal stamping strength and stiffness are high.
(4) Metal stamping generally does not generate chips and scraps, consumes less material, and does not require other heating equipment, so it is a material-saving and energy-saving processing method, and the cost of metal stamping parts is low.