Metal Stamping Parts may have different degrees of burrs during the stamping process, which is unavoidable. There are many ways to remove the burr of metal stamping parts. This article will introduce some of the methods of deburring. We choose the practical method according to the actual production, the requirements of the stamping process, the batch size of the production, and the production cost and work efficiency.
1. Manual removal of burrs: If the amount of stamping products is small, the most feasible method is to remove them manually, which has good quality, but is not suitable for mass processing.
2. Electrolytic deburring: This method has the highest efficiency and best quality, but the equipment cost is too high, and ordinary small enterprises cannot afford it.
3. Vibration grinding to remove burrs (gear burrs), this method has high efficiency and good quality.
4. For the heat-treated stamping parts, the burrs can be removed by shot peening, which can also eliminate the surface stress of the material.
5. Use an air gun with various shapes of gun tips to remove burrs. This method has a better effect and high work efficiency.
6. Use electrochemical deburring. If the equipment is self-made, the cost is not high, and it is economical, high/efficient, and easy to use.
Pro Success Development Limited