The laser cutting processing speed directly affects the kerf width and kerf surface roughness. The plate thickness of different materials, different cutting gas pressures, and cutting speed has a good point. The following editor will briefly talk about the impact of cutting speed on laser cutting processing.
Consequences of cutting too fast:
1. It may not be able to cut through, and sparks will spray.
2. Some areas can be cut through, but some areas cannot be cut through.
3. The whole section is rough, but does not produce dissolving stains.
4. The cutting section is oblique stripe road, and the lower half is melted.
Consequences of cutting too slow:
1. Over-melting, the cut surface is rough.
2. The slit becomes wider, and the sharp corners are completely melted.
3. Affect the cutting efficiency.
Pro Success Development Limited